Settings

The page will reload to apply your changes.
Theme

ASCII Art Font

ASCII Art Menu

Original Usenet message from alt.ascii-art, 21 Apr 1999.
Re: overprinting ASCII on Laserjet?

Re: overprinting ASCII on Laserjet?

> : >I have been trying to print out one of the OLD line printer type posters
> : >on my HP Laserjet.  I have tried a bunch of Escape code combination to
> : >make it treat a CR(Carriage return) as what it should be (reset to left
> : >margin, but do not advance the line).  But no matter how I set Line
> : >Termination, it always prints a line, hits the CR, and advances the
> : >line.  I know the printer is taking my Escape sequences, because I can
> : >set it to 8 lines an inch.
> : >
> : >So, is it even possible to "overprint" with a laser printer?
>
>       See if the printer has a little toggle switch for
> "auto linefeed" and turn it off.
>

This is a Hewlett Packard 5P Laserjet and everything is software controlled
with NO switches to play with.  The HP uses PCL programing.  There are Line
Termination controls that "should" effect how the CR+LF codes in single and
combination are interpreted.  But in another place in the HP codes it says that
the LF (linefeed) ASCII 10 is interpreted as CR (carriage return) ASCII 13.

Since a laser places toner on the drum as it goes (I am assuming here), I was
hoping someone else in the group could either confirm that "overprinting" is
impossible, or they could give me a hint at how to control the printer to
properly process the file.

BTW, the print file contains 130 printable characters per line.  If the line is
actually supposed to advance, there is a CR and LF at the the end the line.  If
there is to be overprinting there is just a CR at the end of the line.

Original message headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f996b,950692fbe9f3775e
X-Google-Attributes: gidf996b,public
From: Robert Wood <rob...@ionet.net>
Subject: Re: overprinting ASCII on Laserjet?
Date: 1999/04/21
Message-ID: <371...@ionet.net>#1/1
X-Deja-AN: 469177350
Content-Transfer-Encoding: 7bit
References: <371...@ionet.net> <199...@ng122.aol.com> <371...@news.iglou.com>
X-Accept-Language: en
Content-Type: text/plain; charset=us-ascii
Organization: ioNET Inc.
Mime-Version: 1.0
Newsgroups: alt.ascii-art
About this message. This message was posted publicly to the newsgroup alt.ascii-art in 1999 and is mirrored here unchanged as part of the Historic Archives – only email addresses are masked. The artwork and text belong to their original authors: if you copy a piece, keep the artist's initials or signature intact and credit them where you can. Are you the author? Contact us to get your posts attributed, connected to your artist profile, or removed.

Report this message

Help us keep the archive clean and accurate. Reports are reviewed by a person – nothing is changed automatically.

Help classify this post